The fuel oil from plastic waste can be widely used in industries such as steel and iron and boiler factories, ceramics, power or chemical industries etc. And it can be used for generators to get electricity. The carbon black can be used for making construction bricks with clay or used as fuel.
To meet the demands of different customers, we provide six models of waste plastic pyrolysis plant for customers to choose. And they are BLJ-6, BLJ-10, BLL-30.
|Working Method||Batch||Semi-Continuous||Fully Continuous|
|Raw Materials||Waste Plastic, Tyre, Rubber, Oil Sludge, Medical Waste|
|Pattern||Horizontal & Rotary|
|Heating Materials||Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.|
|Floor Area (L*W*H)||20*10*10m||25*15*10m||25*15*10m||33*15*10m|
|Operating Pressure||Normal Pressure||Constant Pressure|
|Cooling Method||Water Cooling|
|Service Life||5-8 Years|
The working process of batch plastic pyrolysis plant:
1. Put the waste plastics into the reactor.
2. Heat the reactor by using fuel materials, such as coal, charcoal, fuel gas, wood etc. The reactor will be slowly heated, when the temperature reaches around 250 degree, the oil gas will be produced.
3. A part of oil gas will go to the condensing system to form liquid oil. The gas which can not be liquefied under normal pressure will go back to combustion system. It can be used as fuel material to heat the reactor, which will save energy for the whole working process.
5. After finishing oil production, the temperature of reactor will be down. At the same time, carbon black will be discharged automatically.
6. Lastly, the smoke produced from reactor can achieve national emission standard after being processed by the dedusting system.
For each set of plant, one one technician will be sent to guide your installation, test the machine and train your workers. Besides, we will provide one-year warranty and our engineers are available at service at any time.
|1||Fuel oil||• can be sold directly.|
|• Reprocessed into diesel and gasoline by use oil distillation machine.|
|• can be used as fuel.|
|2||Carbon black||• can be sold directly.|
|• Reprocessed into high quality carbon by the carbon black grinding equipment.|
|• make carbon brick by briquetting equipment.|
|3||Combustible gas||• can be as fuel heating the reactor.|
1. Polyvinyl chloride PVC, polyethylene: PE (such as films, bottles, electrical insulating materials, handbags, pipes, drums, bottles / calcium bottles, daily necessities, etc.) pure plastic has oil yield is about 95%.
2. Polypropylene: PP (such as films, plastic rope, tableware, pots, barrels, furniture, bags, caps, car bumpers, etc.) of pure oil yield 90%.
3. PS (such as electrical appliances, stationery, cups, food containers, appliance housings, electrical fittings, foam products, toys, etc.) of pure oil yield at 90%.
4. ABS plastic: 40%.
5. Pure white plastic sheeting: about 70%.
1. Design the installation drawings according to your site.
2. 1 year warranty, engineers available to service at any time.
3. Periodical call visit, to make sure there is no problems of the equipment.
4. Design specific maintenance program according to different situation of your plant.
5. For each set of machine, one technician will be sent to guide your installation, test the machine and train your workers. Besides, we will provide one month’s service for free.