Oil Sludge Treatment Plant

Oil Sludge Treatment Plant
Plastic Pyrolysis Plant Was Successfully Installed In Nigeria
pyrolysis plant would be shipped to the Netherland
Semi-Continuous-Pyrolysis-Plant-In-Brazil
BLL-16 Tyre Pyrolysis Plant In Jordan

Waste Oil Distillation Plant Was Installed Successfully In Ukraine

Oil sludge is the by-product when producing oil, mixed with water, oil, and solid sediment, which is the dangerous waste but has high recycling value. With the increasingly tense supply of oil resources, many countries are doing researches in oil sludge recycling technology. The pyrolysis technology is drawing wide attention of researchers all over the world with its advantages of disposal thoroughly and high energy recycling. The proper oil sludge treatment is essential since these waste materials are hazardous to human and environment.

We have more than 10 years of experience in the field of pyrolysis, so we can provide you the high quality oil sludge treatment pyrolysis plant, which also applies to the waste rubber, tyre, plastic and medical waste. Finally, we can get these end products: 12.5% fuel oil, 72.5% solids and 15% waster.

To meet different customers’ demands, we have designed six types of pyrolysis plant. And they are BLJ-6, BLJ-10,BLJ-16,BLL-20.

Hot Models

BLJ-6 Batch
BLJ-6 Batch
BLJ-10 Batch
BLJ-10 Batch
BLJ-16 Semi-Continuous
BLJ-16 Semi-Continuous
BLL-20 Fully Continuous
BLL-20 Fully Continuous
Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Advantages Of Oil Sludge Treatment Plant:

(1)The raw materials are fed by screw conveyor, so the base will not move.

(2)The screw conveyor is fully enclosed during pyrolysis process and has small feeding inlet, so the gas will not leak and danger can be avoided.

(3)We use renewable heating method, which can not only save fuel but also strengthen the life span of reactor.

(4)The exhaust gas will be recycled to be used in the heating process, which can save fuel and reduce pollution.

(5)In the dedusting system, three specifically designed steps are used to dedust the hot smoke,which can make sure the released smoke is clean

(6)The catalyst we use is composed of 24 kinds of chemicals, which can speed up the pyrolysis process and improve the quality of final oil.

Flow Chart Of Crude Oil Sludge Treatment Process:

Oil Sludge TreatmentOil Sludge Treatment_1Oil Sludge Treatment_2Oil Sludge Treatment_3

reactor
reactor
casing
casing

mainifold
mainifold

hydroseal
hydroseal

Oil Condenser
Oil Condenser

Oil Tank
Oil Tank

Container oil condenser
Container oil condenser

Dedusting System
Dedusting System

Flue Tube Condenser
Flue Tube Condenser

Model BLJ-6 BLJ-10 BLL-16 BLL-30
Daily Capacity 6T 10T 15-20T 30T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge, Medical Waste
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m L12.5*W2.2*H2.5m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 53.6kw/h
Floor Area (L*W*H) 20*10*10m 25*15*10m 25*15*10m 33*15*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Service Life 5-8 Years

1. Design the installation drawings according to your site.

2. 1 year warranty, engineers available to service at any time.

3. Periodical call visit, to make sure there is no problems of the equipment.

4. Design specific maintenance program according to different situation of your plant.

5. For each set of machine, one technician will be sent to guide your installation, test the machine and train your workers. Besides, we will provide one month’s service for free.

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.
    Product Model:

    Your Name(required):

    Your Email(required):

    Your Tel(required):

    Your Country:

    Your Company:

    Your Message(required):