Small Scale Plastic Recycling Plant

Small Scale Plastic Recycling Plant
Plastic Pyrolysis Plant Was Successfully Installed In Nigeria
pyrolysis plant would be shipped to the Netherland
Semi-Continuous-Pyrolysis-Plant-In-Brazil
BLL-16 Tyre Pyrolysis Plant In Jordan

Waste Oil Distillation Plant Was Installed Successfully In Ukraine

The small scale plastic recycling plant  is equipped with safety device and advanced dedusting system, which will guarantee safety and no pollution in the production.

Our small plastic recycling plant belongs to the batch pyrolysis plant, and it can handle 6 MT waste plastics per day. The followings are its main features:

(1) It doesn’t need pre-treatment devices and the tires can be put into the reactor directly.

(2) Its’ feeding process and the discharging of steel wire are both manual.

(3) It can work 1 shift per day and its reactor needs 3-4 hours to cool down before starting another batch.

Hot Models

BLJ-6 Batch
BLJ-6 Batch
BLJ-10 Batch
BLJ-10 Batch
Data BLJ-6 BLJ-10
Raw material Waste tires, rubber, plastic, oil sludge
Daily capacity 6 MT 10 MT
Working method Batch
Operating pressure Constant pressure
Reactor rotate speed 0.4 turn/minute
Total power 24 kw/h 30 kw/h
Reactor size D2.2*L 5.1m D2.8*L6.2 m
Space (L*W*H) L20*W10*H10 m L25*W15*H10 m

The working process of batch small scale plastic recycling plant:

1. Put the waste plastics into the reactor.

2. Heat the reactor by using fuel materials, such as coal, charcoal, fuel gas, wood etc. The reactor will be slowly heated, when the temperature reaches around 250 degree, the oil gas will be produced.

3. A part of oil gas will go to the condensing system to form liquid oil. The gas which can not be liquefied under normal pressure will go back to combustion system. It can be used as fuel material to heat the reactor, which will save energy for the whole working process.

5. After finishing oil production, the temperature of reactor will be down. At the same time, carbon black will be discharged automatically.

6. Lastly, the smoke produced from reactor can achieve national emission standard after being processed by the dedusting system.

For each set of plant, one one technician will be sent to guide your installation, test the machine and train your workers. Besides, we will provide one-year warranty and our engineers are available at service at any time.

output rate of plastic pyrolysis products

1. Polyvinyl chloride PVC, polyethylene: PE (such as films, bottles, electrical insulating materials, handbags, pipes, drums, bottles / calcium bottles, daily necessities, etc.) pure plastic has oil yield is about 95%.

2. Polypropylene: PP (such as films, plastic rope, tableware, pots, barrels, furniture, bags, caps, car bumpers, etc.) of pure oil yield 90%.

3. PS (such as electrical appliances, stationery, cups, food containers, appliance housings, electrical fittings, foam products, toys, etc.) of pure oil yield at 90%.

4. ABS plastic: 40%.

5. Pure white plastic sheeting: about 70%.

plastic oil and carbon black

NO. Name Usage
1 Fuel oil • can be sold directly.
• Reprocessed into diesel and gasoline by use oil distillation machine.
• can be used as fuel.
2 Carbon black • can be sold directly.
• Reprocessed into high quality carbon by the carbon black grinding equipment.
• make carbon brick by briquetting equipment.
3 Combustible  gas • can be as fuel heating the reactor.

1. Design the installation drawings according to your site.

2. 1 year warranty, engineers available to service at any time.

3. Periodical call visit, to make sure there is no problems of the equipment.

4. Design specific maintenance program according to different situation of your plant.

5. For each set of machine, one technician will be sent to guide your installation, test the machine and train your workers. Besides, we will provide one month’s service for free.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours. Thanks.