Plastic To Oil Machine For Sale

Plastic To Oil Machine For Sale
Plastic Pyrolysis Plant Was Successfully Installed In Nigeria
pyrolysis plant would be shipped to the Netherland
Semi-Continuous-Pyrolysis-Plant-In-Brazil
BLL-16 Tyre Pyrolysis Plant In Jordan

Waste Oil Distillation Plant Was Installed Successfully In Ukraine

We are familiar with White Pollution, which has been a big problem in the whole world, although many efforts have been made to change this situation, to some degree, it is all in vain. The best method is using the pyrolysis technology to recycle the waste plastic and turn the plastic into oil.

As a professional manufacturer, our plastic to oil machine for sale can meet different customers’ demand.

They can be classified as the batch operating plant, the semi-automatic plastic into oil machine and the fully continuous plastic one.

The Models of the Plastic to Oil Machines:

1. Batch Pyrolysis Plant: BLJ-6, BLJ-10. Its working speed is low, and it needs more labor cost, but it applies to the small scale plastic waste recycling.

2. Semi-Continuous Pyrolysis Plant: BLL-16. It works faster than the batch one, and it costs less than the continuous one.

3. Continuous Pyrolysis Plant: BLL-30, BLL-40, BLL-50. If you want to recycle the waste plastic in a large scale, and you have the spare money, then this kind of continuous pyrolysis plant would be your choice, because of its high automation degree, its working speed is fast, and the labor cost is low.

Hot Models

BLJ-6 Batch
BLJ-6 Batch
BLJ-10 Batch
BLJ-10 Batch
BLL-16 Semi-Continuous
BLL-16 Semi-Continuous
BLL-30 Fully Continuous
BLL-30 Fully Continuous
BLL-40 Fully Continuous
BLL-40 Fully Continuous
BLL-50 Fully Continuous
BLL-50 Fully Continuous
Data BLJ-6 BLJ-10 BLL-16 BLL-30,BLL-40,BLL-50
Daily capacity 6 MT 10 MT 20 MT 30MT,40MT,50MT
Raw material Waste tires,rubber,plastic,oil sludge,medical waste
Working method Batch Semi-Continuous Fully continuous
Operating pressure Constant pressure
Reactor rotate speed 0.4 turn/minute Not rotary type
Total power 24 kw/h 30 kw/h 54 kw/h 53.6,62,84(kw/h)
Reactor size(m) D2.2*L5.1 D2.8*L6.2 D2.8*L7.1 L12.5*W2.2*H2.5
Space (L*W*H) 20*10*10 m 25*15*10 m 25*15*10 m 20*15*10m,33*15*10m

The Attractive Characteristics of the Waste Plastic To Oil Machine:

1. Our device is equipped with casing outside of reactor, and between them there are some refractory materials to prevent the reactor from burning down and prevent the heat from releasing out, thus it increases reactor’s lifespan. At the same time, insulating materials are added into the space to decrease fuel consumption, which can reduce production cost drastically.

2. The most important one is that compared to the traditional waste treatment method, it needs less space, and it does not do harm to the environment.

plastic oil and carbon blackoutput rate of plastic pyrolysis products

NO. Name Usage
1 Fuel oil • can be sold directly.
• Reprocessed into diesel and gasoline by use oil distillation machine.
• can be used as fuel.
2 Carbon black • can be sold directly.
• Reprocessed into high quality carbon by the carbon black grinding equipment.
• make carbon brick by briquetting equipment.
3 Combustible  gas • can be as fuel heating the reactor.

1. Polyvinyl chloride PVC, polyethylene: PE (such as films, bottles, electrical insulating materials, handbags, pipes, drums, bottles / calcium bottles, daily necessities, etc.) pure plastic has oil yield is about 95%.

2. Polypropylene: PP (such as films, plastic rope, tableware, pots, barrels, furniture, bags, caps, car bumpers, etc.) of pure oil yield 90%.

3. PS (such as electrical appliances, stationery, cups, food containers, appliance housings, electrical fittings, foam products, toys, etc.) of pure oil yield at 90%.

4. ABS plastic: 40%.

5. Pure white plastic sheeting: about 70%.

1. Design the installation drawings according to your site.

2. 1 year warranty, engineers available to service at any time.

3. Periodical call visit, to make sure there is no problems of the equipment.

4. Design specific maintenance program according to different situation of your plant.

5. For each set of machine, one technician will be sent to guide your installation, test the machine and train your workers. Besides, we will provide one month’s service for free.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours. Thanks.